Zur Startseite dieses Webangebots

Sarikaya Funktechnik

Kenwood ASC

Autorisiertes Service-Center

Sie sind hier:  » Neuigkeiten  » Neuigkeiten

Neuigkeiten

Neues Kabel im Program von M&P-HYPERFLEX 10

M&P-HYPERFLEX 10

Best in its class for:

1) Extreme Flexibility: perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).

2) New improved dielectric: outstanding attenuations up to 10 Ghz, ideal for “MOON BOUNCING” lovers, even better than some solid core cables of the competition.

3) Screening efficiency: >105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 168 wires, (78% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. (moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS).

4) lightweight: 11,1 Kg/100 m instead of 13 Kg of our M&P-ULTRAFLEX 10, for a reduced stress of the “hanging and swinging" stretch of the cable in rotor operated antennas.

5) Excellent Power handling

Kabelaufbau:
Innenleiter reines Kupfer 99,99% , 19 x 0,59 mm, Ø 3,0 mm
Dielektrikum dreischichtiges phys. Zell PE, PEG Ø 7,3 mm ± 0,05
Außenleiter 1 Kupferfolie, kunststoff beschichtet CU-PET **
Außenleiter 2 Kupfergeflecht, opt. Bedeckung 78% 168 Drähte
Außenhaut PVC, hoch flexibel, Ø 10,3 mm ± 0,15 mm UV-resistent
Gewicht 11,1 kg / km
Farbe black

Elektrische Eigenschaften:
Widerstand DC
Außenleiter 12 Ω / km
Innenleiter 3,6 Ω / km
Kapazität 78 pF / m ± 2
Verkürzungsfaktor 87%
Wellenwiderstand 50 Ω ± 3
Spitzenspannung (Sparktest) 8 kV
Schirmungsmaß 100 - 2000 MHz >105 dB



Yaesu Cashback - von Yaesu gibt's 50 Euro zurück! 


Aktion gültig vom 9. Januar 31. März 2016


Kaufen Sie jetzt Ihren neuen FTM-100DE und ein HRI-200 Interface Yaesu erstattet Ihnen 50€!

  • 1x FTM-100DE FM/C4FM VHF/UHF Funkgerät  + 1x HRI-200 Wires-X Link Adapter Interface
  • = 50,- € zurück

Die Aktion wird direkt von Yaesu und nicht über uns abgewickelt. Sie müssen die Unterlagen auf dem Postweg direkt zu Yaesu nach England senden! Die Aktion gilt nur für Geräte, welche im Aktionszeitraum gekauft wurden.

ben Sie hier den gewünschten Absatzinhalt ein...


IC-7300

Deutsches Prospekt IC-7300 BRO_D_2016

IC-7300 The Innovative HF Transceiver
with High Performance Real-Time Spectrum Scope.

Class Leading Real-Time Spectrum Scope

The IC-7300 s real-time spectrum scope is class-leading in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to an intended signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.


Real-Time Spectrum Scope Specifications
Real-Time Spectrum Scope Specifications
* Number of pixels shown at the 60dB level, when receiving a signal.

High-Resolution Waterfall Function

High-Resolution Waterfall Function
Spectrum scope + Waterfall

The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of the IC-7300 and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.

Spectrum scope + Waterfall
Spectrum scope + Waterfall
(expand)
Zoom in
Zoom in

Audio Scope Function

The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either the transmit or receive audio can be displayed on the FFT scope with the waterfall function and the oscilloscope.


FFT scope/Oscilloscope + Waterfall
FFT scope/Oscilloscope + Waterfall
FFT scope/Oscilloscope
FFT scope/Oscilloscope

RF Direct Sampling System

The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading technology making an epoch in amateur radio.

RF Direct Sampling System

New IP+ Function

The new IP+ function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion.

Class Leading RMDR and Phase Noise Characteristics

The IC-7300 s RMDR is improved to about 97dB* (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.



*At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)
RMDR

15 Discrete Band-Pass Filters

Band-Pass Filters
Band-pass filters

The IC-7300 has 15 discrete RF bandpass filters. The RF signal is only passed through one of the bandpass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters.


Built-In Automatic Antenna Tuner

Automatic Antenna Tuner
Automatic antenna tuner

The antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function* allows a wide range of temporary antennas to be tuned.
* Do not use the Enforced Tuning function except in case of an emergency. Transmission power may be reduced.


Multi-Dial Knob for Smooth Operation

The combination of the multi-dial knob and the touch screen offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob.


Large Touch Screen Color TFT LCD

Touch screen interface
Touch screen interface

The large 4.3 inch color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.

Band stacking register screen
Band stacking register screen
Multi-function meter
Multi-function meter
Menu screen
Menu screen
Setting screen
Setting screen
Memory name input
Memory name input operation
Frequency Input
Frequency input operation

Superior Sound Quality

To offer superior sound quality, a new speaker unit has been incorporated and is allocated dedicated space in the aluminum die-cast chassis.

Aluminum die-cast chassis
Aluminum die-cast chassis
Newly designed speaker unit
Newly designed speaker unit

SD Memory Card Slot for Saving Data

SD Memory Card Slot
SD memory card slot
(The SD card is not included.)

The IC-7300 can store various content on an SD card such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Personal and firmware update data can also be stored on the SD card for easy setting.

Rear Panel View

Rear Panel View

Other features

  • New HM-219 hand microphone supplied
  • A large and effective cooling fan system
  • A multi-function meter
  • 101 memory channels (99 regular, 2 scan edges)
  • Optional RS-BA1 IP remote control software
    (the spectrum scope with the waterfall can be observed)
  • CW functions: Full break-in, CW reverse, CW auto tuning

Supplied accessories (May differ depending on version)

  • Hand microphone, HM-219
  • DC power cable
  • Fuses
  • Plugs
ben Sie hier den gewünschten Absatzinhalt ein...

Freitag, 2. Oktober 2015 - 19:26 Uhr
IC-7300 NEU

IC-7300 NEU

Freitag, 10. Oktober 2014 - 16:12 Uhr
TS-590SG New Product, Für mehr Infos hier klicken!

New Product Release Information
Oct 2014
TS-590SG
HF/ 50MHz All-Mode TRANSCEIVER
Kenwood introduces
new HF/50MHz All-Mode Transceiver
Four years ago we launched our best-selling TS-590S
transceiver into the
mid-range HF market. Technology has moved on, so n
ow it is a pleasure to
announce the updated TS-590S G model, which repla
ces the TS-590S in
production.

Dienstag, 1. April 2014 - 14:05 Uhr
H 2010 - ein neues qualitativ hochwertiges Koaxialkabel

- Ein neues qualitativ hochwertiges Koaxialkabel

- Ein 50 Ohm Koaxkabel mit außergewöhnlichen elektrischen Eigenschaften

- Ein flexibles Produkt sowohl für mobile als auch für portable Anwendungen

- Ein Koaxkabel mit einm extrem hohen Schirmungsmaß

- Ein Koaxkabel für alle drehbaren Antennen - Horizontal- und Vertikalbetrieb eingesetzt werden.

Das Kabel ist UV-resistent und ist aufgrund seines sehr hohen Schirmungsmaßes (> 105 dB von 100 bis 2000 MHz) ein ideales Koaxkabel für den Einsatz in Laboratorien, Einsatzfahrzeuge des öffentliches Dienstes, hams' shacks, ...

Das Kabel ist lieferbar in Längen bis zu 1000 m.

Sonntag, 23. Februar 2014 - 18:22 Uhr
Der ID-5100E kommt! Für mehr Infos hier klicken!

.

Freitag, 28. Juni 2013 - 17:57 Uhr
Weitere Informationen, Link zum Prospekt!

.

Ältere Beiträge

Anmelden

Icon-Legende
Zurück
Zur Startseite dieses Webangebots
Zum Seitenanfang
Direkt zum Text springen.
Zum Seitenende
Aktuelle Seite ausdrucken.
Seite mailen
Bookmark diese Seite. Netscape User drücken bitte strg+D.